BactoAttaQ Self-disinfecting surface protection

Baqtoattaq vehicle interior sealant is the ideal solution to protect the vehicle interior from bacteria in the long term.

The innovative formula of Baqtoattaq sealant forms an invisible barrier on the treated surfaces. This barrier provides long-lasting, self-disinfecting surface protection against bacteria. The invisible protective layer lasts longer than 365 days and continuously reduces up to 99.999% of bacteria, viruses, fungi, algae and yeasts. The antimicrobial mode of action also permanently inhibits the formation of mold and odors caused by bacteria. Bactoattaq's technology was awarded the German Innovation Award in 2019.

Advantages of Bactoattaq:

• Tested and certified by recognized and international laboratories and institutes.
• Dermatologically rated "very good
• UV, salt water and weather resistant
• Easy to clean due to sealed surfaces

Instructions for correct application:

1. For basic cleaning of the surface to be coated, first spray on "Phase 1 (Cleaner + Primer)". Then dry the surface with a clean paper or microfiber cloth.
2. Spray the desired surface evenly with "Phase 2 (Activator)" spray until it is completely covered. To avoid streaking, thoroughly polish the surface with a microfiber cloth. Note: Shake well before use!
3. After 6 hours, the surface treated with Bactoattaq is completely cured and can be used again.
4. Subsequent cleaning of the surface can be done with cleaning agents with a pH value of 4-10. If, contrary to expectations, streaks appear after application, the coating can be removed with cleaners outside the permissible pH value so that the streaks disappear. The areas must then be treated again with phase 1 + phase 2.